68 iSeries and AS/400e System Builder
LANs and ATM
Comm.
Restrictions
See “Comm. Restrictions” on page 103, for communications rules and restrictions.
#2723
#9723
#2723 PCI Ethernet IOA
The #2723 provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network.
Consists of an adapter card and internal code that supplies Ethernet Version 2 and IEEE 802.3 Media Access Control
(MAC), plus IEEE 802.2 Logical Link Control (LLC) functions. It has an RJ-45 connector and a 15-pin D-shell connector
for attachment of client-supplied cabling. The Ethernet/IEEE 802.3 IOA is capable of operating in half or full duplex mode.
AUI Ethernet or RJ-45 twisted pair cable must be ordered separately. Cabling must meet or exceed Industry Standard
EIA/TIA T568B. The #9723 is a base LAN.
For each #2723/#9723 PCI Ethernet IOA that is selected to run on the #2866 PCI Integrated Netfinity Server, one #0221
Ethernet on IPCS must be selected to indicate this placement.
PCI slots required: One
The #2723 is a Customer Install Feature.
#2724
#9724
#2724 PCI 16/4 Mbps Token Ring IOA
The #2724 provides a single attachment to a 16 Mbps or a 4 Mbps Token Ring Network. It consists of an adapter card,
internal code that supplies IEEE 802.5 MAC and IEEE 802.2 LLC functions, and an external 8-ft (2.4 m) cable.
Alternatively a twisted pair cable for attachment to the RJ-45 connector on the IOA can be ordered separately. The #9724
is a base LAN.
For each #2724/#9724 PCI Token Ring IOA that is selected to run on a #2866 PCI Integrated Netfinity Server, one #0220
must be selected to indicate this placement.
The IOA is capable of operating in half or full duplex mode.
PCI slots required: One
The #2724 is a Customer Install Feature.
#2815 #2815 PCI 155 Mbps UTP OC3 ATM IOA
The #2815 PCI 155 Mbps UTP OC3 ATM IOA provides attachment into an ATM network using the Unshielded Twisted
Pair (UTP-5) interface. This interface is intended for connection to both local area switches and direct connection to
service provider equipment. You can find technical specifications and industry standards supported on the ATM Forum
Web site at:
http://www.atmforum.com
The #2815 is used typically where 155 Mbps speeds are required over distances of less than 100 m.
Prerequisite: #7102 System Expansion Unit
High-speed PCI slots required: One
The #2815 is a Customer Install Feature.
#2816 #2816 PCI 155 Mbps MMF ATM IOA
The #2816 PCI 155 Mbps MMF ATM IOA provides attachment into an ATM network using the Multi-Mode Fiber (MMF)
62.5 micron interface. This interface is intended for connection to both local area switches and direct connection to
service provider equipment. You can find technical specifications and industry standards supported on the ATM Forum
Web site at:
http://www.atmforum.com
The #2816 is used typically where 155 Mbps speeds are required over distances of less than 2 km.
Prerequisite: #7102 System Expansion Unit
High-speed PCI slots required: One
The #2816 is a Customer Install Feature.