Chapter 3. IBM iSeries and AS/400e 250 models and packages 69
#2818 #2818 PCI 155 Mbps SMF OC3 ATM IOA
The #2818 PCI 155 Mbps SMF OC3 ATM IOA provides attachment into an ATM network using the Single Mode Fibre
(SMF) 9micron interface. This interface is intended primarily for direct connection to service provider equipment, but can
be used for local area switches. You can find technical specifications and industry standards supported on the ATM
Forum Web site at:
http://www.atmforum.com
The #2818 is used typically where 155 Mbps speed is required over distances of 16 to 40 km.
Prerequisite: #7102 System Expansion Unit.
High-speed PCI slots required: One
The #2818 is a Customer Install Feature.
#2838
#9738
#2838 PCI 100/10 Mbps Ethernet IOA
The #2838 provides attachment to standard 100 Mbps high-speed Ethernet LANs and allows attachment to existing
10Mbps Ethernet LANs. The #9738 is a base LAN. If #2838/#9738 PCI 100/10 Mbps Ethernet IOA is selected to be run
on a #2866 PCI Integrated Netfinity Server, then one #0222 100/10 Mbps Ethernet on IPCS/#2890 PCI Integrated
Netfinity Server specify feature is required. The IOA is capable of operating in half or full duplex mode. The adapter
comes standard with an RJ-45 connector for attachment to UTP-5 media.
Cabling for 10 Mbps must be CAT-3 or CAT-5. Cabling for 100 Mbps must be CAT-5 that meets or exceeds Industry
Standard EIA/TIA T568A or T568B. The maximum cable length is 100 m.
High-speed PCI slots required: One
Maximum: One per #2890 PCI Integrated Netfinity Server
The #2838 is a Customer Install Feature.
The #2838 was withdrawn from marketing on 21 November 2003.
#2866 #2866 PCI Integrated Netfinity Server
The #2866 PCI Integrated Netfinity Server contains a 333 MHz Pentium II Processor, two LAN IOA slots for high
performance serving to LAN-attached PCs, and four main storage slots. No base main store memory is supplied. A
minimum of one main storage feature is required. The four main storage slots can each contain one of the following
features, for a maximum of 1024 MB:
#2861 32 MB Integrated PC Server Memory
#2862 128 MB Integrated PC Server Memory
#2867 256 MB Integrated PC Server Memory
A minimum of one and a maximum of two of any of the following LAN IOAs are supported:
Only one IOA can be a #2838/#9738.
#2723/#9723 PCI Ethernet IOA
Specify #0221 is required for each IOA ordered.
#2724/#9724 PCI Token Ring IOA
Specify #0220 is required for each IOA ordered.
#2838/#9738 PCI 100/10 Mbps Ethernet IOA
Specify #0222 is required for each IOA ordered.
A minimum of 64 MB IOP memory is required for Windows NT.
#0325 PCI Integrated Netfinity Server Extension Cable for Windows NT or Windows 2000 is required.
#1700 PCI Integrated Netfinity Server Keyboard/Mouse for Windows NT or Windows 2000. It is the default in the
U.S.A.
Windows NT is not supported after OS/400 V5R2. Upgrade to Windows 2000.
A display unit is required to support Windows NT and Windows 2000.
If running OS/2, the #0325 is not allowed.
For country- or region-specific keyboard, mouse, and display support, go to:
http://www.ibm.com/eserver/iseries/integratedxseries/
The #2866 is a Customer Install Feature.