IBM E50 Troubleshooting, There is no screen image, “No Connection, Check Signal Cable” appears

5E50-4p.fm Page 9 Thursday, March 13, 2003 11:50 AM

Troubleshooting

Before calling for service, check the information in this section to see if you can solve the problem yourself.

There is no screen image

■Check to see that both the monitor and the computer are plugged in and turned on.

“No Connection, Check Signal Cable” appears

■Check the signal cable connection between the computer and the monitor.

“Sync. Out of Range” appears

■The input signal frequency is over or under the synchronization range of the monitor, see “Specifications” section.

The screen image is too light or too dark

■Adjust the brightness or contrast settings, see On Screen Dispaly section.

The screen image is too large or too small

■Adjust the size settings, see H-size and V-Size On Screen Dispaly section.

■Adjust the Zoom setting, see On Screen Dispaly section.

The colors are distorted with dark or shadowed areas

■Activate the degauss feature, see On Screen Dispaly section.

■Adjust the color temperature, see On Screen Dispaly section.

The power indicator light is blinking green

■The monitor is using its power management system, see “PowerSaver” section.

You need the monitor driver software

■Download the driver from the internet at http: //www.ibm.com/support

English - 9

Italiano Portuguese Deutsch Español Français English