Critically Low the user.
Battery Chargers Charge Battery in LXE Multi-Charger
The main battery can be charged in the LXE Multi-Charger. The Multi-charger
must
not
be used in Hazardous Locations.
Insert the main battery into any charging cup in the Multi-Charger. The narrow
end goes into the charging cup first. The retaining clip snaps the battery into
place in the charging cup. Remove the battery pack by pulling the battery
straight up and out.
Do not "slam" or drop the battery into the charging cup. Failure to follow these
instructions can result in damage to the main battery or the Multi-Charger.
Note: The main battery can also be charged in the secondary battery charging
pocket in the Desktop cradles. An MX5 does not need to be in the cradle
at the time the secondary charging pocket is being used.
LXE Multi-Charger (Optional)
The main battery pack can be charged in the LXE Multi-Charger. Please refer to
the “MX5 Multi-Charger Operator’s Guide” for instruction.
The multi-charger requires an external power source before battery pack
charging can commence. The external Power Supply connection for the Multi-
charger is shipped with the multi-charger.
The LXE Multi-Charger is not approved for use in a Hazardous Location.
Cradles Note: The “MX5 Cradle Reference Guide” contains cradle installation and
technical information.
Important: The cradles are not designed to secure an MX5 with
protective padded case. The vehicle cradle is not
designed to secure an MX5 with a trigger handle. The
desktop cradles will secure MX5’s with handstraps or
trigger handles.
MX5 docking cradles give the MX5 the ability to communicate with a host
computer and other devices. In addition, using wall AC adapters or DC/DC