IBM ServeRAID BIOS
Copyright IBM Corp. 1995, 2001
Ver: 3.00.12 08/14/2000, 2001
__________________________________
Press Ctrl+I to access the Mini-Configuration Program.
Initializing ServeRAID Controller 1 in Slot 1.
Power-on self-test can take up to 59 Second(s) -- test Passed.
Drive configuration-can take up to 6 Minute(s) 0 Second(s) -- test Failed.
Controller POST and Config Error Codes: ISPR = EF10 BCS = 09 ECS = 20.
Following drives not responding (old state: new state: ch SID)
(RDY:EMP: 2:0)
The system has a configuration error due to above condition(s). Press: F4 - Retry
the command F5 - Update Controller configuration to exclude
NON-RESPONDING drives Warning: NON-RESPONDING drives will be set to
DDD, DHS, or EMP state F10 - Exit without change
POST
(ISPR
)ms}L:0PO4,KZDfw(ISPR)ms}L1P>ms""
4MI\-r#WHP>nPI\D-r#Z,^Fcz19Cb)}Lozzbv
ServeRAID Jb#j{DmszkPmZZ129 3D:ServeRAID;P#
EF 10 1!ISPR#^ISPR ms#
9ZXX ABZXX
IgB"KSMJO}/wH}pDSCSI \_ms#
1. (}O*I\PJOD(OyPSCSI gBD,S,;sXB}<,Rv
SCSI S53kXFw.dDms#
/f:;*4F5,r*ba|DdC#
g{ISPR msTfZ,r4PTBYw,1=ms;YfZ:
a. XB20XFw
b. |;XFw
":g{XFwlb=dC|D,;*!q0#f|D1#xG4F10 F}
zzKa{DNN!~#
Z7BJOoO87