IBM T117 Connecting y our Monitor for Digital

ENGLISH

Connecting your Monitor for Digital

1. Turn off your computer and all attached devices

2. Tilt the monitor all the way forward.

3. Connect the DVI connector to the DVI port located on the back of the

Monitor. See picture below.

4. Connect the other end of the signal cable to the DVI port located on

the back of the graphics adapter. See picture below.

Graphic s adapter

DVI

nal Cable

Contents

Main IBM T117/T119 Monitor T117/T119 User's Guide English Second Edition (July/2006) Contents Page Setting up the monitor Product Description Handling Instructions Workplace Preparation Adjusting the Monitor Position Caring for your Monitor Connecting y our Monitor for Analog Connecting y our Monitor for Digital Connecting DVI Cable Switching on your M onitor Device Driver Installation Driver Installation for Windows 2003 or Windows Me Driver Installation for Windows X P Driver Installation for Windows VISTA Auto Setup Auto Setup Auto Setup for DOS Auto Setup for Windows 2003, Windows Me,Windows XP or Windows Vista Manual Setup Adjusting Your LCD Monitor User controls Operation OSD Lock / Unlock y To lock the OSD, first turn off the monitor. Then, hold down On-scree n display (OSD) controls Initial appearance of OSD OSD functions Page General Information Display modes Power Man a gement Produc t Disp osal Troubleshooting Remove the If the card is Select the Adjust Press any key Check the Check that Check that no A small number of missing, Further Help 27 Specifications 30 to 83 KHz Product recycling and disposal