Ice-O-Matic manual EMF 1106 Series Flake ICE Maker, Hard Water, Food Safety and Tight Spaces

EMF 1106 Series

Flake ICE Maker

✓Produces up to 1152 lbs. (524 Kgs.)* of ICE per day

✓Constructed from sturdy, corrosion-resistant 300 series stainless steel

✓Only 16 inches wide

✓Available with an air-or water-or remote-cooled condenser

EMF 1106 on a B55 Bin

ICE-O-Matic is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

ProblemSolution

Tight-Fitting Spaces	Maximum ICE
Kitchen space utilization	Maximum ICE production in a minimum amount of space :
	•	No additional side clearance required on a
		30 inch wide bin
	•	Maximum ICE production in a 16 inch cabinet
	•	Works on all industry dispensers and bins

Poor Ice Quality	Dependable ICE
Ice is too wet and soft	ICE-O-Matic Flake ICE Makers remove excess water by
	pushing the flaked ICE through an extrusion process.
	The result is high quality flaked ICE which is ideal for
	medical, supermarket or restaurant applications.

Operating Environments	ICE-O-Matic Tough
Built to last?	Constructed with a brass evaporator and rugged stainless
	steel transport system enclosed in polyurethane insulation
Dirty Air Filter	Filter-Free Air
Forget to change the air filter?	No air filter to change

*Rated at 70 ° (21°) Air / 50° (10°) Water