ICOM-manual

SLEEP mode
The ICOM-200/201 can be put into sleep mode if the Tiny-Tiger® inside has a
real time clock. In sleep mode the power consumption of the ICOM-200/201 is
descreased significantly to just approx. 25mA. While in sleep mode, no BASIC
program is executed by the ICOM-200/201.
2
Sleep circuit
The internal clock and SRAM of the Tiny-Tiger® are buffered through a
Goldcap. The power consumption of clock and SRAM is approx. 70µA, with a
fully loaded Goldcap this is enough for about 3 hours.
To use the SLEEP mode of the ICOM-200/201 Jumper J9, which is located
under the LC display, has to be drawn. On delivery the jumper is inserted, so
SLEEP mode is disabled.
2-4 Wilke Technology GmbH • 0241/ 918900 • http://www.wilke.de/ • support@wilke.de