23
3rPLOTTER MODEqROUTE REGISTRATION AND EDIT
(3)-3 Character list
zCharacter list
xSpaces
cCursor movement directions
vEND
The character list appears on the Route Enter/Edit screen during route No.
selection, and is used for comment entry.
The character list is a list of characters used for comment entry.
Select a character from the character list using the [UP]/[DOWN] or
[LEFT]/[RIGHT] key and press the [SET] key.
The selected character is entered in the comment field of the selected route No.
When a space is selected and the [SET] key is pressed, a space is entered in over-
write mode in the comment field of the selected route No.
The cursor moves to the arrow direction you specified here.
Select the direction in which you want to move the cursor using the [UP]/[DOWN]
or [LEFT]/[RIGHT] key and press the [SET] key.
Use this command when you finish or abort comment entry.
Select “END” using the [UP]/[DOWN] or [LEFT]/[RIGHT] key and press the [SET]
key.
You will exit from the character list screen.
*Pressing the [CLR] key also allows you to exit from the character list screen, irre-
spective of what is highlighted in yellow.
" #END
ABCDEFGHIJKLMNOPQRS
TUVWXYZ 0123456789
abcdefghijklmnopqrs
tuvwxyz .,!#$%&´-()
z
cvx