22
3
rPLOTTER MODEqROUTE REGISTRATION AND EDIT
(3)-2 Clearing a route The procedure of clearing a route is as follows.
qPress the [MENU] key.
The Main Menu screen will appear.
wSelect Plotter Menu using the [UP] or [DOWN] key and press the [SET] key.
The Plotter Menu screen will appear.
eSelect Route Enter/Edit using the [UP] or [DOWN] key and press the [SET] key.
The Route Enter/Edit screen will appear.
rSelect ERS (erase) or ERSALL (erase all) using the [LEFT] or [RIGHT] key
and press the [SET] key.
When you select ERS, route No. 1 will be highlighted in yellow.
*When you select ERSALL, proceed with step ibelow.
tUsing the [UP] or [DOWN] key, select the route No. you want to clear.
*Pressing the [RIGHT] key permits you to go to the next page (route Nos. 1120)
of the Route Enter/Edit screen. To return to the previous page (route Nos.
110), press the [LEFT] key.
yPress the [SET] key.
A message will appear at the bottom of the screen, indicating the route No. you
selected is going to be cleared.
uPress the [SET] key again to clear the route.
iWhen you select ERSALL in step rabove:
Press the [SET] key.
A message will appear at the bottom of the screen, indicating all the registered
routes are going to be cleared.
oPress the [SET] key again to clear all the routes.
5
Select ERS and press the
[SET] key. Select the route No. you want
to clear and press the [SET] key. Press the [SET] key, and the
selected route is cleared.
¡Route Enter/Edit screen
5
¡Selecting a route No.
5
¡Clearing the route
CLR
ENT
SET
BACK
SEL
80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ENTER/EDIT ERS ERSALL
CLR
SET
SET
CANC
SEL PAGE
80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ENTER/EDIT ERS ERSALL
CLR
OK
SET
CANC 80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ERASE ROUTE 1 ?
CLR
OK
SET
CANC 80.0FT
ERASE ALL ROUTES ?
80.0FT
Select ERSALL and press the
[SET] key. Press the [SET] key, and all
the routes are cleared.
¡Selecting all routes ¡Clearing all routes
CLR
ENT
SET
BACK
SEL
ENTER/EDIT ERS ERSALL