
20
3
rPLOTTER MODEqROUTE REGISTRATION AND EDIT
(3)-1 Registering and editing navigation routes
You can register up to 20 navigation routes, each of which consists of up to
50 points.
qPress the [MENU] key.
The Main Menu screen will appear.
wSelect “Plotter Menu” using the [UP] or [DOWN] key and press the [SET] key.
The Plotter Menu screen will appear.
eSelect “Route Enter/Edit” using the [UP] or [DOWN] key and press the [SET] key.
The Route Enter/Edit screen will appear.
rSelect “ENTER/EDIT” using the [LEFT] or [RIGHT] key and press the [SET] key.
This will allow you to select a route, and route No. 1 will currently be highlighted
in yellow.
tUsing the [UP] or [DOWN] key, select the route No. you want to register.
*Pressing the [RIGHT] key permits you to go to the next page (route Nos. 11–20)
of the Route Enter/Edit screen. To return to the previous page (route Nos.
1–10), press the [LEFT] key.
yPress the [SET] key.
The character list will be displayed at the bottom of the screen and END be high-
lighted in yellow.
*The selected route No. will be displayed in the corresponding comment field.
The contents in the comment field can be overwritten and changed.
uSelect a character from the character list using the [UP]/[DOWN] or
[LEFT]/[RIGHT] key and press the [SET] key.
Each time the [SET] key is pressed, the selected character is entered in the
comment field.
*A comment such as a user-defined route name of up to eight characters can be
entered in each comment field.
iSelect “END” and press the [SET] key.
The coastline screen will appear.
oMove the cross hair cursor to the beginning point of the route using the
[UP]/[DOWN] or [LEFT]/[RIGHT] key and press the [SET] key.
Move the cross hair cursor to the next turning point and press the [SET] key.
*Up to 50 turning points can be registered per route.
*Sections between registered turning points are indicated as blue solid lines.
!0When you finish route registration, press the [MENU] key.
The routes are registered, and you will return to the coastline screen.
5
Move the cross hair cursor to
a turning point and press the
[SET] key. Repeat this
operation to set a route.
34°23.752N
135°01.792E 27°
2.89
NM
0:25
5
5
Enter a comment and select
END; then press the [SET] key.
Select Route Enter/Edit and
press the [SET] key.
¡Route Enter/Edit screen
¡Comment Entry screen
¡Route Registration screen
CLR
ENT
SET
BACK
SEL
80.0FT
CLR
SET
SET
CANC SEL
80.0FT
80.0FT
ROUTE ENTER/EDIT
ROUTE ENTER/EDIT
NO.
1
2
3
4
5
6
7
8
9
10
ENTER/EDIT ERS ERSALL
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
" # END
ABCDEFGHIJKLMNOPQRS
TUVWXYZ 0123456789
abcdefghijklmnopqrs
tuvwxyz .,!#$%&´-()
CLR
SET
SET
EXIT
MENU
CANC
ÅRegistering navigation routes