23
7
BATTERY CASE
7
6

■Optional battery case (BP-240)

When using the optional battery case attached to the trans-
ceiver, install 6 ×AAA(LR03) size alkaline batteries as illus-
trated at right.
qUnhook the battery cover release hook (q), and open the
cover in the direction of the arrow (w). (Fig.1)
wThen, install 6 ×AAA(LR03) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
eFit the cover in the direction of the arrow (e), then close
(r). And hook the battery cover release hook until it
makes a ‘click’sound (t). (Fig.3)
CAUTION:
•When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
•Keep battery contacts clean. It’s a good idea to clean bat-
tery terminals once a week.
•Never incinerate used battery cells since internal battery
gas may cause them to rupture.
•Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE: When the optional battery case is attached, the
battery type must be selected to “DRYBATT” when turn-
ing the transceiver ON. ((☞p.10))
q
BP-240
w
Fig.1
Fig.2
Fig.3 e
r
t