9
2BASIC OPERATION
n Clock function
The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format
and time/date settings.
When you use the transceiver for the first time, or after the
transceiver has been left unused for a long time, make
sure to check the date and time indication after turning the
power ON. If the time and date are not correct, reset
them.
D Time and date indication
q Push [Clock] to indicate the current time and date on the
LCD.
 •Whentheindicationformatis setto12-hour,“AM”or“PM”is
indicated.
 •TheLCDindicationreturnsto thestand-bymodeafter 30sec.
has passed with no operation.
12HR 12:00PM
YMD08-04-01
The time indication format (12-hour/24-hour) Time
Date
Date indication format (Y: Year, M: Month, D: Day)
w Push [Clock] again to return to the stand-by mode.
D Time and date settings
q Push [Clock] to indicate the current time and date on the
LCD.
12HR 12:00PM
YMD08-04-01
w Push and hold [Clock] for 1 sec. to enter the time and date
setting mode.
 •Thetimeindicationformat,“24HR”or“12HR”blinks.
12HR 12:00PM
YMD08-04-01
e Push [Clock] to select the desired item to be changed.
r Push [CH Up] or [CH Down] to set the selected item.
12HR 03:00PM
YMD08-04-01