Versions of the IC-R8500 which display the “CE”
symbol on the serial number seal, comply with
the essential requirements of the European
Radio and Telecommunication Terminal Directive
1999/5/EC, and that any applicable Essential Test Suite
measurements have been performed.
UNPACKINGPRECAUTIONSIMPORTANT

READ THIS INSTRUCTION MANUAL

CAREFULLY before attempting to operate the
receiver.
SAVE THIS INSTRUCTION MANUAL. This
instruction manual contains important safety and oper-
ating instructions for the IC-R8500.
EXPLICIT DEFINITIONS

RINDOOR USE ONLY! NEVER expose the

IC-R8500 or AC adapter to rain, snow or any liquids.

RNEVER connect the receiver to an AC outlet

directly. This may pose a fire hazard or result in an
electric shock. Always use the supplied AC adapter or
connect to a 13.8 V DC power source.

RNEVER connect to an AC outlet that exceeds the

suggested voltage for each AC adapter version. This
could cause a fire or ruin the AC adapter and/or
receiver.

RNEVER use non-rated fuses. Non-rated fuses

could cause a fire or ruin the receiver.
NEVER let metal, wire or other objects touch any
internal part or connectors on the rear panel of the
receiver. This will cause electric shock.
AVOID using or placing the receiver in areas with tem-
peratures below –10°C (+14°F) or above +50°C
(+122°F).
AVOID placing the receiver in excessively dusty envi-
ronments or in direct sunlight.
AVOID placing the receiver against walls or putting
anything on top of the receiver. This will obstruct heat
dissipation.
RESPECT other people’s privacy. Information over-
heard but not intended for you cannot lawfully be used
in any way.
i
Accessories included with the IC-R8500:
Qty.
qAC adapter (AD-55A)*........................................... 1
wDC power cable (OPC-023C)................................ 1
eMini plug (2-conductor, 3.5d)................................. 1
rPhono (RCA) plugs ...............................................2
tFuse (FGMB 125 V 3 A; internal use) ...................1
yFuses (FGB 3 A; for DC cable) .............................2
uScrews (M4×12 for optional MB-23) .....................2
iScrews (C0 3×8 for optional MB-23 feet) ............. 4
oAllen bolts (M5×8 for optional IC-MB12) .............. 4
*Some versions are not supplied with an AC adapter.
q
w
erty u i
o
WORD DEFINITION
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.