Icom IC-R6, IC-RX7 2

2PANELDESCRIPTION

MONITOR KEY

➥Mute and release the CTCSS (DTCS) or 2-tone squelch mute.

Open any squelch/deactivate any mute while pushing this key.

(LMR operation only)

➥Activates one of (or two of) the following functions on each chan-

nel independently:(PMR operation only)

• Push and hold to un-mute the channel (audio is emitted; ‘Audible’

condition).

• Push to mute the channel (sets to ‘Inaudible’only).

• Push to un-mute the channel (sets to ‘Audible’only).

• Push after the communication is ﬁnished to send a ‘reset code’.

NOTE:The un-mute condition (‘Audible’ condition) may auto-

matically return to the mute condition (‘Inaudible‘ condition)

after a speciﬁed period.

LOCK KEY

Push and hold to electronically lock all programmable keys except

the following:

[Call](incl. Call A and Call B), [Moni(Audi)] and [Emergency] keys.

OUTPUT POWER SELECTION KEY

Select the transmit output power temporarily or permanently, de-

pending on the pre-setting.

•Ask your dealer for the output power level for each selection.

TALK AROUND KEY

➥Push to turn the talk around function OFF.

➥Push and hold to turn the talk around function ON.

•The talk around function equalizes the transmit frequency to the re-

ceive frequency for transceiver-to-transceiver communication.

WIDE/NARROW KEY

➥Push to select the IF bandwidth to wide.

• The wide passband width can be selected from 25.0 or 20.0 kHz

using the CS-F14

CLONINGSOFTWARE

. (PMR operation only) Ask

your dealer for details.

➥Push and hold to select the IF bandwidth to narrow.

IC-F14_F24-6.qxd 06.9.29 6:09 PM Page 10 (1,1)