44
11 DIGITALMODE OPERATION
DDStation call sign programming
Station call sign must be programmed for the specified sta-
tion call as well as repeater operation in both digital voice and
low-speed data communications.
qPush [A•
FUNC
]and [0•
OPT
]to enter
OPTION SET MODE
, then
push [YY]or [ZZ]several times to select the call sign select
mode.
•“yUC” appears for station call sign.
wPush and hold [0•
OPT
]for 1 sec. then rotate [VOL] to se-
lect the desired call sign channel.
ePush [YY]to select call sign programming mode.
•The 1st digit blinks and channel indication stops blinking.
rRotate [VOL] to select the desired character or code.
•Push [ZZ]or [YY]to move the cursor to left or right, respectively.
tPush [YY]to select 2nd digit, then rotate [VOL]to select
the desired character or code.
•2nd digit blinks (1st digit stops blinking).
•Repeat this step for programming station call sign.
yPush [0•
OPT
]to save the call sign.
uRotate [VOL] to select an another channel from “C1” to
“C6.”
iRepeat steps wto uto program another station call sign
channels.
✔
For your information:
Station and/or repeater call sign can be programmed from
Received call record when a call is received.
See page 46 for details.