56
11 DIGITALMODE OPERATION
DDTx message programming
At least one of the Tx message channels must be pro-
grammed, if you want to use the GPS message. The GPS
message is transmitted from Tx message channels.
qWhile in
OPTION SET MODE
, push [YY]or [ZZ]several times
to select “tXm,” then push and hold [0•
OPT
]for 1 sec. to
edit the message indication, and then rotate [VOL] to se-
lect the message channel.
•One of either “C1” to “C6” blinks.
wPush [YY]to select message programming mode.
•The 1st digit blinks and channel indication stops blinking.
eRotate [VOL] to set the desired character.
rPush [YY]to select 2nd digit, then rotate [VOL]to select
the desired character.
•2nd digit blinks (1st digit stop blinking).
•Repeat this step for programming.
tPush [0•
OPT
]to save the message.
yRepeat steps wto tto set another message channels.
uPush [✱•
ENT
](or [D•
CLR
])
to exit
OPTION SET MODE
.
• Available characters
DDRx message indication
When an individual station call with message is received, the
message can be stored into the Rx message record, up to 6
records and each record can indicate a message of up to 20
characters. The oldest record is overwritten when another
message is received.
qWhile in
OPTION SET MODE
, push [YY]or [ZZ]several times
until “RXm” appears.
wPush and hold [0•
OPT
]for 1 sec. to edit the message indi-
cation, and then rotate [VOL] to select the message
recored.
•One of either “C1” to “C6” blinks.
ePush [YY](or [ZZ]) to scroll the message.
•Push [ZZ]or [YY]to move the cursor to left or right, respectively.
rPush [✱•
ENT
](or [D•
CLR
])
to exit
OPTION SET MODE
.
(3)
(D)
(N)
(X)
(+)
(4)
(E)
(O)
(Y)
(–)
(”)
(5)
(F)
(P)
(Z)
(✱)
(6)
(G) (Q)
(/) (7)
(H)
(R)
(,)
(8)
(I) (S)
(space)
(9)
(T)
(0)
(A)
(U)
(1)
(B)
(V)
(2)
(C)
(J) (K) (L)
(M)
(W)
(.)
(
))((
)(’)(&)(
%
)($)(#)(!)
(<)(:) (;) (=) (>) (?)
(@)
([) (\) (]) (^)