58
11 DIGITALMODE OPERATION
DDGPS Automatic transmission
qWhile connected to a GPS receiver, push [A•
FUNC
]and
[0•
OPT
]to enter
OPTION SET MODE
.
wPush [YY]or [ZZ]several times to select the GPS automatic
transmission.
•“GtX” appears.
eRotate [VOL] to set the interval time for the GPS auto-
matic transmission.
•Interval time is selectable from 0.5 (30 sec.), 1, 3, 5, 10, 30 min.
rPush [YY]three times to select the transmit message se-
lection, if desired.
•GPS Tx message is selectable from OFF and C1 to C6.
•Tx message must be programmed in advance. (see page 56 for
setting)
tPush [✱•
ENT
](or [D•
CLR
]) to exit
OPTION SET MODE
.
IMPORTANT:GPS Automatic transmission transmits at
every setting interval even while receiving an another sta-
tions communication. To prevent interference to other sta-
tions, set the the Repeater lockout item “RLO” (set to “bU”
busy lockout) in
INITIALSET MODE
. (p. 64)
DDReceiving a GPS transmission
qPush [A•
FUNC
]and [0•
OPT
]to enter
OPTION SET MODE
.
wPush [YY]or [ZZ]several times to select the received posi-
tion.
•“RXP.OS” appears.
ePush and hold [0•
OPT
]for 1 sec. to enter the position indi-
cation.
•Latitude data and longitude date appear by every pushing [YY]
or [ZZ].
rPush [0•
OPT
]to return
OPTION SET MODE
, then push [YY]
twice to select the received GPS message.
tPush and hold [0•
OPT
]for 1 sec. to enter the message.
•Received message is indicated, push [ZZ]or [YY]to move the
cursor to left or right, respectively.
yAfter checking a received position or message, push
[✱•
ENT
](or [D•
CLR
]) to return to normal operating mode.