Icom IC-V8000 service manual Specifications, ‘ General, ‘ Transmitter, ‘ Receiver

SECTION 1 SPECIFICATIONS

‘ GENERAL

• Frequency coverage	:
		Version	Receive	Transmit
		[USA]		144.000–148.000 MHz
		[SEA]	136.000–174.000 MHz*	140.000–150.000 MHz*
		[CSA]		136.000–174.000 MHz*

	*Specifications Guaranteed: 144–148 MHz only
• Type of emission	: FM (F2D / F3E)
• Frequency stability	: ± 10 ppm (–10˚C to +60˚C; +14˚F to +140˚F)
• Tuning steps	: 5, 10, 12.5, 15, 20, 25, 30 or 50 kHz
• Antnna connector	: SO-239 (50 Ω )
• Power supply requirement	: 13.8 V DC (Operable voltage range: 11.7 to 15.9 V)
(negative ground)
• Number of memory channel	: 207 channels (including 6 scan edges and 1 call channel)
• Call channel	: 1 channel
• Scanning mode	: Full, Program, Priority, Memory, Channel, Skip, Tone, DTCS, Bank and WX
• Current drain (approx.)	:
			High (75 W)	15 A
		Transmit	Middle High (25 W)	9.0 A
			Middle Low (10 W)	6.0 A
			Low (5 W)	5.0 A
		Receiving	Max. audio	1.0 A
			Stand-by	0.8 A
• Usable temperature range	: –10˚C to +60˚C; +14˚F to +140˚F
• Dimensions (projections not included)	: 150(W) ⋅ 50(H) ⋅ 150(D) mm; 5 29⁄32(W) ⋅ 1 31⁄32(H) ⋅ 5 29⁄32(D) in.
• Weight	: 1.09 kg; 12.3 oz.; 38.4 oz

‘ TRANSMITTER

• RF output power (at 13.8 V DC)	: 75 W / 25 W / 10 W / 5 W (High / Middle High / Middle Low / Low)
• Modulation system	: Variable reactance frequency modulation
• Maximum frequency deviation	: Narrow: ±2.5 kHz*; Wide: ±5.0 kHz
• Spurious emissions	: Less than –60 dB
• Microphone connector	: 8-pins modular (600 Ω )

‘ RECEIVER

• Receive system	: Double conversion superheterodyne system
• Intermediate frequencies	: 1st	21.7 MHz
	2nd	450 kHz
• Sensitivity	: 0.15 µV at 12 dB SINAD (typical)
• Squelch sensitivity	: 0.08 µV at threshold (typical)
• Selectivity	: Narrow; More than ±3.0 kHz at –6 dB, Less than ±9.0 kHz at –55 dB*
	Wide; More than ±6.0 kHz at –6 dB, Less than ±14.0 kHz at –60 dB
• Spurious and image rejection	: 60 dB (typical)
• Audio output power (at 7.2 V DC)	: More than 2.0 W at 10% distortion with an 8 Ω load
• Ext. speaker connector	: 3-conductor 3.5(d) mm (1⁄8”)/8 Ω

*[USA] version only

All stated specifications are subject to change without notice or obligation.

1 - 1