15
3
BASIC OPERATION
3
■Stun function
When the specified ID, set as a killer ID, is received, the stun
function is activated.
When the killer ID is received, the transceiver switches to the
password required condition. Entering of the password via the
keypad is necessary to operate the transceiver again in this
case.
■Priority A channel selection
When one of the following operations is performed, the trans-
ceiver selects the Priority Achannel automatically.
Priority Ais selected when;
•Clear down signal is received/transmitted
-Set the ‘Move to PrioA CH’ item as ‘Clear down.’
•Turning the power ON
The Priority Achannel is selected each time the trans-
ceiver power is turned ON.
•Status call
The Priority Achannel is selected when transmitting a sta-
tus call.