Ide Line 751-079 Introduction Important Saveguards, List of Components, Selector Dial, Before USE

UK

INTRODUCTION

Please read this instruction manual carefully and familiarize yourself with your new grill oven, before using the first time. Please retain this manual for future reference.

IMPORTANT SAVEGUARDS

When using your oven, basic safety precautions should always be followed:

-Read all instructions.

-Use only oven for its intended use.

-To protect against a risk of electric shock, do not immerse the oven in water or any other liquids.

.	Never yank cord to disconnect from outlet; instead, grasp
	plug and pull to disconnect.

-Do not allow cord to touch hot surface. Let oven cool completely before cleaning.

-Do not operate oven with a damaged cord or if the oven has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the oven; take it to a qualified serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the oven is used.

-Close supervision is necessary for any appliance being used by or near children. Do not leave oven unattended while connected.

-To avoid a circuit overload, do not operate another high voltage appliance on the same circuit.

-If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

-All repair work should be carried out by an approved service center.

-The heating elements have been slightly greased and as a result the oven might slightly smoke when switched on for the first time. After a short while, this will cease. Open the oven door and turn the temperature dial to 250°C and set the timer at 15 minutes.

LIST OF COMPONENTS

1

7

3

62

4

8

5

1.Thermostat dial

2.Control light

3.Selector dial

4.Timer

5.Glass door

6.Wire rack

7.Baking pan

8.Crumb tray

SELECTOR DIAL

1.OFF

2.Upper heating element

2

3. Lower heating13 element

4. Lower & upper	4
heating
element

BEFORE USE

-Make sure that there is enough ventilation around the oven.

-Make sure that the oven is completely dry before use.

-The oven should not be placed on an untreated wood surface. Place the oven on a heat resistant surface.

-Be aware that the feet of the oven can leave some marks on the table, if this happens, remove the marks with a damp cloth added a little housekeeping spirits. Regular cleansing agent can also be used. Be aware that untreated surfaces can not stand housekeeping spirits.

6