OPERATION CONDITION

USA

Before starting up

As required, push-fit appropriate adapter.

If using an extension cord, it must be at least 14 gauge.

The voltage rating stated on the tool should correspond to the main power voltage.

Power cord and plug must be in perfect condition.

Starting up

Connect tool to main power supply.

Step-switch position

0

:

Tool is switched off

Step-switch position

I

:

Tool heats to 660°F. Reduced air flow

Step-switch position

II

:

Tool heats to 930°F. Maximum air flow

Step 0

Step I

Step II

5

Page 5
Image 5
IDEAL INDUSTRIES Heat Gun manual Before starting up, Starting up, Operation Condition, Tool is switched off, Step