Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES and its products,
and services, visit IDEAL INDUSTRIES web site at:
Precautions and Safety Information
Use the Meter only as described in the Users Manual. If you do not do so, the protection provided by the Meter may be impaired. Read the “Safety Information” page before servicing this product. In this manual, a Warning identifies conditions and actions that pose hazard (s) to the user; a Caution identifies conditions and actions that may damage the Meter or the test instruments.
The Symbols
The symbols used on the Meter and in this manual are explained in Table A.
Table A. The Symbols
Symbol Meaning | Symbol Meaning | |
|
| |
Alternating signal | Battery | |
|
| |
Direct signal | Earth ground | |
|
| |
Refer to the manual. | Fuse | |
Important information. | ||
|
Take appropriate precautions.
Hazardous voltage may beDouble insulated present
CAT III IEC over voltage Category III
Form Number | Rev 5 Dec 2006 |