NAMES OF RESPECTIVE PARTS
1. Top lid | 2. Washing tub | 3. Gradienter | 4. | Operation panel 5. Filter | 6. | ||
Adjustable foot | . | 7. Pulsator | 8. Top frame | 9. Drain hose |
| ||
Simple installation
The washing machine should be placed inside the room with a flat floor, which is convenient for water supply and drain, has low moisture and no direct sunshine, and does not freeze in winter.
Please adjust the washing machine even according to the instructions below to make the washing machine run steadily in low noise.
1.Loosen the fixing pole on the adjusting foot, screw in or screw out the adjusting foot to make the four foot placed even on the floor.
2.When the floor is slanting or uneven, it is not easy to make even only by the adjusting foot. Then the rubber band can be added to the unflat place.
3.Use gradienter to check whether the washing machine is placed flat.
4.After the adjustment the fixing pole should be screwed back and tight.
Notices:
If the washing machine is not placed flat (the inclination angle is over 2o), it may cause great vibration or automatic check and rectification or other abnormal circumstances will often take place in the course of spinning.
Loose
Bubble | Base foam |
|
Adjustable foot
Accessories (Part of standard machine)
|
| Fixing ring(1) is used for the |
|
| fixation in time of the installation |
|
| of the drain hose |
Universal connector(2) Water inlet hose assembly(2) | Base cover (1) | Drain hose (1) |
Screw in
Fixing pole
Tight
Screw out
Gradienter mark
3 | 4 |
