Installation of Your Appliance
Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level your appliance, adjust the legs at the front of the appliance.
NOTE: TO AVOID VIBRATION, THE APPLIANCE MUST BE LEVEL
Allow 5 inches of space between the back and side of the appliance, which allows the proper air circulation to cool the compressor.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.) Avoid locating the appliance in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator requiring more frequent defrosting of the appliance.
Plug the appliance into an exclusive properly installed – grounded wall outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions.
IDENTIFICATION DIAGRAM
Temperature control
Ice box
Drip tray
wire shelves
Balcony shelves
Glass shelf
vegetable crisper
Bottle rack
