iHome warranty Using the iHM64, Connecting the iHM64, Charging the iHM64

Power OFF	Power ON
Position	Position

Power/Charging Indicator

LED

2-in-1 Charging/Audio

Cable included

USB Connection

Using the iHM64

Press down gently on speaker to power it ON or OFF.

Connecting the iHM64

NOTE: A special battery-saving feature prevents the speaker from powering on unless the micro-USB plug is connected. Check your USB connections before using.

•Connect the micro-USB plug to the USB connection on the speaker.

•Connect the 3.5mm audio plug to the headphone jack or line-out of any audio device.

•Press down on the speaker to turn it ON. The white Power indicator light will come on. (Pressing down again will turn the speaker OFF).

•Press play on your audio device and adjust its volume to

listen to audio.

Note: the larger USB plug is used for charging only, not for audio. Please refer to next section for charging

Charging the iHM64

Charging the iHM64

Note: When not in use, turn speaker off

to save battery power.

mobile phone PSP iPod MP3/MP4

PC

Laptop

Connect To Audio Source

The iHM64 is powered by a rechargeable battery in the speaker. When the white power light dims, or if you start to notice sound distortion at higher volumes, it's time to recharge the battery.

•Connect the larger USB plug to a powered USB port, such as that on a computer. The indicator light on the speaker will turn to red while charging and turn white when fully charged.

Note: you can continue to listen to the speaker while it is charging.

The rechargeable battery in your speaker can be replaced only by iHome Consumer Repair Department.