The battery compartment is located inside the R earpiece. To open the battery compartment cover, press with your thumb at the top of the cover as shown to release the locking tab and slide the cover downward to remove it.

Insert the two “AAA” batteries into the battery compartment as shown. Be sure to install the batteries in the correct polarity (+/-) according to the markings in the battery compartment. If the

batteries are inserted incorrectly the ANC circuit will not operate.

After installing the batteries, replace the battery compartment cover and make sure it is completely flat against the earpiece with no gap at the bottom.

Batteries information

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbone-zinc) or rechargeable (nickel-cadmium) batteries.

Replacing the Batteries

The two “AAA” batteries should provide over 60 hours of continuous operation with the ANC circuit ‘On’. If you notice that the ANC circuit is no longer providing any noticeable noise reduction, or that the ANC LED indicator does not turn ‘On’, it’s time to replace the batteries.

We recommend that you use a well-known brand of alkaline batteries for longest life and best performance.

Follow the ‘Installing The Batteries’ instructions above to replace the batteries.

Connect The Detachable Cable

Connect the detachable headphone cable to the jack on the

bottom of the L earpiece. The cable should be connected with the in-line volume control closest to the L earpiece as shown.

Make sure that the plug is fully inserted into the jack. If the plug is not fully inserted the sound may be intermittent, or you may only hear sound from one of the earpieces.

Note: The volume control on the cable was set at ‘Maximum’ at our factory.

Connect the other end of the detachable cable to the headphone jack of your external music source such as an iPod, iPhone, iPad, MP3 player, personal CD player, etc. Again, make sure that the plug on the detachable cable is fully inserted into the headphone jack of your external music source.

Listening to Music

• Before putting on your headphones, we recommend that you rotate the volume control on the headphone cable counter-clockwise until it is approximately half way between the Minimum and Maximum levels.

• Begin playback of your external music source and adjust the volume level of your external device to approximately 50% of maximum volume.

• Place the iB50 headphones on your head according to the L and R markings on the earpieces. When worn properly the detachable cable will be on your left side. Slide the L and R earpieces up or down to achieve the most comfortable fit.

• Adjust the volume controls on the headphone cable and your external device to a comfortable listening level. Note: If one control is set too high and the other is set too low, the sound may be distorted.

• To reduce or eliminate extraneous noise, such as the engine roar in an airplane cabin, slide the ANC On/Off switch the ‘On’ position. The ANC LED indicator turns red when the ANC circuit is ‘On’.

• When you are finished listening slide the ANC switch to the ‘Off’ position to extend the life of the batteries. The ANC LED indicator goes ‘Off’. Also remember to shut off the power of your external music source.

Using The Mute Button (Only When ANC is 'On')

Depress the Mute button on the L earpiece to temporarily shut off the sound so that you can hear someone speaking to you without removing the headphones. Release the Mute button to resume normal operation.

Using the 2-Prong Airline Adapter

Some older aircraft have audio/visual systems that use dual headphone jacks in the armrests of their seats. To use your iB50 headphones with this type of A/V system, insert the plug of the headphone cable into the jack of the included 2-prong adapter as shown and insert the 2-prong adapter into the dual jacks in the armrest of your seat.

Travel Pouch

To keep your headphones clean, store them in the included travel pouch when not in use. The L and R earpieces fold flat for convenient storage.

Page 1
Page 2
Image 2
iHome iB50 Connect The Detachable Cable, Listening to Music, Using The Mute Button Only When ANC is On, Travel Pouch
Page 1

iB50 specifications

The iHome iB50 is a versatile and compact Bluetooth speaker designed to enhance your audio experience, whether at home or on the go. With its sleek design and portable features, this speaker is perfect for music lovers who appreciate good sound quality combined with usability.

One of the standout features of the iHome iB50 is its Bluetooth connectivity. This technology allows users to wirelessly connect their smartphones, tablets, or other Bluetooth-enabled devices for seamless music streaming. The pairing process is straightforward, making it easy to enjoy music from a variety of sources without the hassle of cables.

In addition to Bluetooth, the iB50 also includes a 3.5mm audio jack, providing users with the option to connect non-Bluetooth devices. This versatility ensures that you can enjoy your favorite music regardless of your device’s capabilities.

The audio performance of the iHome iB50 is impressive for its small size. It delivers clear and balanced sound, making it suitable for various music genres. The built-in speakerphone functionality enables hands-free calling, which is particularly useful for users who want to take calls without disconnecting from their music.

Battery life is another critical aspect of the iB50. With up to 10 hours of continuous playtime on a single charge, users can enjoy their music throughout the day without worrying about running out of power. The built-in rechargeable battery adds to the unit’s convenience, allowing for quick recharging via USB.

Design-wise, the iHome iB50 may be small, but it doesn’t compromise on style. Its modern look and compact form factor make it an attractive addition to any space, whether it's in your living room, bedroom, or outdoor setting. It is lightweight too, making it an excellent choice for travel or outdoor activities.

The iHome iB50 is equipped with advanced features such as auto-pairing and a range of up to 30 feet, giving users flexibility and freedom of movement while enjoying their music. Additionally, this speaker is compatible with various smart assistants, enhancing its functionality in a smart home ecosystem.

In summary, the iHome iB50 is a robust and stylish Bluetooth speaker that offers impressive sound quality, versatility in connectivity, and a decent battery life, making it an excellent choice for anyone seeking quality audio on the go.
Top Page Image Contents