iHome iBN16 instruction manual Using Bluetooth Pairing and Playing Your Device Using NFC

NFC antenna

Using the iBN16

Using Bluetooth: Pairing and Playing Your Device Using NFC

This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your Device Manually”.

1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability (typically under ‘Settings’) as described in the device’s user manual.

2. Slide the Power OFF/Bluetooth/Aux Switch on the speaker unit to position.

3. Place your NFC–enabled device in play mode.

4. Touch the NFC area of your playing device against the NFC antenna on top of the unit. The unit will enter automatic pairing mode, tones will

sound and the Power/Charging/Pairing Indicator will flash red and blue while the unit attempts to pair. If prompted, accept Bluetooth pairing. “iHome iBN16” should appear on your device’s menu. Once paired with a device, the Power/Charging/Pairing Indicator light on the back of the unit will glow steadily and your music will play through the unit.

5.Use the controls on your device to play or pause audio, adjust volume, and navigate tracks.

6.When done listening, slide the Power OFF/Bluetooth/Aux Switch to the position to turn the unit

OFF. Remember to turn off your audio device, too.

NOTE: To disconnect your device, simply touch it again on the NFC antenna on top of the unit. To pair a device manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.

4