Playing Audio via Line-In

Using the iBT44

1.Connect one end of the standard stereo 3.5mm audio cable (included) into the line-in jack on the back of the unit and the other end into the headphone or output jack of your audio device.

2.Power on the audio device and use the controls on the device to play or pause audio and navigate tracks.

3.Press the Power Button to turn on the unit in the last active mode. Press the Button as needed until you hear the audio from your connected device through the iBT44 speakers.

4.Turn the Volume Knob to control the system volume. Adjust EQ settings as desired.

5.When done listening, press the Power Button to turn the unit off. Remember to turn off your audio device, too.

FM Radio

1.Press the FM Radio Button to turn on the unit in FM radio mode.

2.Turn the Tuning Knob on the unit to tune in the desired station

3.The unit comes with an external FM radio antenna; connect it to the line-in jack on the back of the unit, then extend the antenna and adjust it for best FM reception.

4.Turn the Volume Knob to control the system volume. Adjust EQ settings as desired.

5.When done listening, press the Power Button to turn the unit off.

7

Page 11
Image 11
iHome iBT44 iB instruction manual Playing Audio via Line-In, FM Radio