iHome iDM15 manual Playing Audio Via Bluetooth, Using the Speakerphone

Playing Audio Via Bluetooth

1.Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

2.Connect the Left and Right speakers using the 3.5 mm stereo connection cable.

3.Press and release the Button to turn on the unit. The blue light will flash as the unit searches for a previously paired device, and then turn solid blue when a previously paired device is detected.

4.Press and release the Button to play or pause audio from your Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices.

5.Use the Volume +/- Buttons to adjust volume.

6.When done listening, press the Button to turn the unit off.

Using the Speakerphone

1.Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to use the speakers as a speakerphone for a linked Bluetooth-capable phone during an incoming or active call. The right speaker (which contains the speakerphone mic) is muted during a speakerphone call; only the left speaker emits audio.

2.Connect the Left and Right speakers using the 3.5 mm stereo connection cable. Speakerphone cannot operate unless both speakers are connected together.

3.Press and hold the Button to turn on the unit (release when blue light appears).

4.Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device, too.

5.When a call is received, playing music is muted to hear the ring tone. Press the green Button to answer the call, or press the red Button to ignore it.

6.When the call is completed, press the Button or Button to end the call and resume previous 5 function.