iHome iH20 IB, iH2O manual Using the Line-inand Headphone Jacks, Batteries Installation

Using the Line-in and Headphone Jacks

a) An audio patch cord comes with the iH20. Use it to play nondocking iPod models or other audio devices through the iH20 Line-in Jack (one end in the device’s line out or headphones jack, the other in the iH20 line in jack).

WARNING: Connector pins are for iPod ONLY. DO NOT attempt to connect any device other than an iPod to the connector socket in the dock. Use Line-in and audio cord instead.

Make sure there is no iPod connected to the iH20 when using the line-in jack. Press the PLAY button to mute or unmute line-in source.

SPULPU

NOTE: Other than mute and volume, the iH20 does not control line in audio devices.

b) Use the Headphone Jack on the iH20 to disable the speakers and listen to your iPod privately.

Batteries Installation

Install/Replace Batteries

The iH20 uses 4 “AA” batteries for portable playing. If sound becomes weak or distorted, it is time to replace the batteries.

The iH20 will not charge your iPod while operating on batteries.

• Open the battery compartment cover located inside the unit above the iPod dock.

• Insert 4 “AA” batteries as indicated.

• We recommend the use of alkaline batteries for longer life.

NOTE: AC adaptor does not charge batteries

Batteries information:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.

5