Battery Installation |
NOTE: THIS UNIT DOES NOT CHARGE iPOD
On/Off Switch |
Right Side Panel |
Using
Thank you for purchasing the iHM18. Designed to work with your iPad, iPhone, iPod, MP3 player or any audio device, this system provides high quality portable audio. Please read the instructions carefully before operating the unit and keep for future reference.
Installing/Replacing Batteries
1.Slide open and remove the battery compartment door located on the bottom of the unit.
2.Insert 4 “AA” (LR6) batteries (not included), checking that the + and – ends of the batteries match the drawing inside the battery compartment. We recommend the use of alkaline batteries for longer life.
3.Close the compartment cover.
For Best Performance
•Do not mix old and new batteries.
•Do not mix alkaline, standard
•Make sure you dispose of batteries properly (see your local regulations).
•If sound becomes distorted or weak, change the batteries.
•If unit will not be used for some time (30 days +), remove batteries to avoid potential damage/leakage from batteries.
Listening to an iPod/MP3 player or other audio device
NOTE: For use with iPad, landscape position is recommended for best stability.
Audio patch cord
Power indicator
NOTE: ADJUST iPod VOLUME
TO AVOID DISTORTION
1.Plug the attached audio patchcord located on the back of the unit into the headphone or
2.Switch the On/Off switch located on the right side of the unit to ON. The Power on indicator will light.
3.Turn on your iPod/MP3 player or other audio device, press play and set desired volume. Place it on the stand if desired.
4.Remember to turn unit and audio device OFF when not in use to save batteries.
NOTE: A connected iPhone can create audio interference noise when communicating with a cell tower. Turn on Airplane mode to disable phone while playing music.
•Place the unit away from sources of direct sunlight or excessive heat.
•Protect your furniture when placing your unit on a natural wood and lacquered finish.
•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can mar the surface.
• Do not mix with used or other battery types/brands | • Do not heat above 75ºC (167ºF) |
• Replace all batteries at the same time | • Do not expose contents to water |
• Do not open batteries | • Do not charge or recharge |
• Do not dispose of in fire | • Do not install backwards |