Listening to Your Audio Device
1.Connect the included stereo audio cable to the output/headphone jack on your audio device and the other end to the aux in jack located on the back of the unit.
2.Press the 
Button on the iHM45. The Audio Indicator (
) appears in the display.
3.Place your audio device in play mode. Use the transport controls on your audio device for playing/pausing, scanning and skipping tracks, etc.
4.Press the 
or buttons on the iHM45 to adjust the system volume.
5.To turn off the unit, press the 
Button on the iHM45. Remember to turn off your audio device, too.
Note: If your audio device is in pause mode over 3 minutes the unit will power off automatically. 6. The Audio Indicator (
) disappears.
Clock Setting
Setting the Time
1.Press the DST Button located on the back of the unit to add one hour for daylight saving time (on) or to subtract one hour for standard time (off). The 
icon will appear on the display to indicate DST is on.
2.Press and hold the Clock Adj. Button for 2 seconds until the hour display flashes. Press the 
or Button until the current hour is displayed. Remember to set the correct AM or PM time (a PM icon to the left of the time display is the PM indicator; there is no AM indicator).
3. Press the Clock Adj. Button again. The minute display will flash. Press the or |
| Button until the |
| ||
current minute is displayed. Hold for rapid advance. |
|
|
4.Press the 
Button during time setting to toggle
5.Press the Clock Adj. Button again to confirm the clock setting. You will hear 2 beeps indicating the clock time is set.
6
