iHome iHM9 Note This Unit Does, NOTE: ADJUST iPod VOLUME, To Avoid Distortion, Off/On Switch

	Off/On Switch
	off on
	power
Battery Installation	Back Panel
NOTE: THIS UNIT DOES
NOT CHARGE iPOD	Power indicator
	Audio patch cord
	NOTE: ADJUST iPod VOLUME
	TO AVOID DISTORTION

Thank you for purchasing the iHM9/iHM10. Designed to work with your iPod/MP3 player or any audio device, this system provides high quality audio and that invites your music to come out and play. Please read the instructions carefully before operating the unit and keep for future reference.

Installing/Replacing Batteries

1.Push to open the battery compartment door located on the bottom of the unit.

2.Insert 4 “AA” (LR6) batteries (not included), checking that the + and – ends of the batteries match the drawing inside the battery compartment. We recommend the use of alkaline batteries for longer life.

3.Close the compartment cover.

For Best Performance

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.

•Make sure you dispose of batteries properly (see your local regulations).

Listening to an iPod/MP3 player or other audio device

1.Plug the attached audio patchcord located on the back of the unit into the headphone or Line-out Jack on your iPod or other audio device.

2.Turn on your iPod/MP3 player or other audio device, press play and set desired volume.

3.Switch the On/Off switch located on the back of the unit to ON.

4.Remember to turn unit and audio device OFF when not in use to save batteries.

NOTE: Connected iPhones can create audio interference noise when a call is received. Turn on Airplane mode to disable phone while playing music.

•Place the unit away from sources of direct sunlight or excessive heat.

•Protect your furniture when placing your unit on a natural wood and lacquered finish.

•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can mar the surface.