RESET
RESET
TEST
TEST
1
iP45 Quick start
To open the iP45, grasp the front lid
of the unit and gently pull upwards
and release into lid rest.
To close, pull lid upwards and gently
press bottom edge towards rear
hinge.

1: Open unit

For this iPhone/iPod
Use this insert
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free
at 1-877-446-6301 to purchase one.
Select the proper insert for your
iPhone or iPod from the table below
and place in dock. Gently place
iPhone/iPod into dock (iPhone/iPod
must not be in a “skin” or case).
iPhone/iPod will charge while
docked. Press the Button on the
iP45 to play your iPhone/iPod.
nano 5G
insert 18
nano 5G
iPod touch 2G/3G
iPod touch 2G
insert 16
iPhone 4
Insert 19
iPhone 4
iP45 IB

iP45 IB-iTouch 4

Nov 4, 2010

4: Time • To use time sync: dock your iPhone/iPod and press the
Button. The unit will sync to the time on your iPhone/iPod.
• To set time manually: move the DST switch on rear of unit to -1 or +1
(subtracts or adds an hour for standard time or daylight saving time).
• Press & hold the Button until the hour display flashes.
Press the / buttons to set the current hour.
• Press the Button. The minute display flashes.
Press the / buttons to set the current minutes.
• Press the Button. The year flashes.
Press the / buttons to set the current year.
• Press the Button. The date flashes.
Press the / buttons to set the current date and day.
• Press the Button to confirm settings.
Attach AC adaptor cable to the DC
jack on back of the iP45 and plug the
other end into a working wall socket
to play and charge iPhone/iPod and
to charge the internal battery.

2: Connect to AC power

pm
radio
wake to
z z z
aux
iPod
iPhone
Prest

3: Dock iPhone/iPod

aux
radioiPodiPhone wake-to
preset
iPhone 3G
Insert 15
iPhone 3G/3GS nano 6G
iPod touch 4G
nano 6G/touch 4G
insert 20