II Morrow Inc 360 Using Routes, Screen Controls, nearest waypoints, waypoint information, Create User waypoints

Apollo 360 Map Display

Introduction to the Apollo 360

Using Routes

The Apollo 360 Map displays route information from the host navigation device in either a 1-Leg or 3-Leg route screen. The screen shows either two or four waypoints (depending on the screen selected) of the current route, as well as the desired track and distance between the displayed waypoints. The 1-Leg screen uses larger characters for easier viewing. The 3-Leg screen provides more information on a single screen.

To change the route screen selection, press the MENU key. Rotate the LARGE knob to select Screen Controls then press the ENT key. Rotate the SMALL knob to select 1-Leg or 3-Leg and press the ENT key twice to return to the navigation mode.

To search for nearest waypoints, press the GOTO/NRST key. The nearest 30 waypoints will be displayed in order of distance from your present position. The waypoint type, bearing to the waypoint and range to the waypoint also shows.. Refer to Navigating a Trip: Searching for Nearest Waypoints.

To view waypoint information, press the INFO key. When displaying navigation screens, information is for the TO waypoint. When viewing the nearest waypoints, rotate the LARGE knob to select a waypoint then press the INFO key to display information for that waypoint. Rotate the LARGE knob to view additional information screens. Press the INFO or ENT keys to exit the Info screen. Refer to the User’s Guide — Waypoint Database.

Create User waypoints at any time by pressing the WPT key. Change the waypoint information by rotating the LARGE and SMALL knobs. When complete, press the ENT key. Refer to Navigating a Trip: Creating Waypoints.

P/N 561-0163-00

II Morrow Inc.