Iiyama AX3819UT BK user manual English

BPress the Auto Button. (Direct adjustment) Or perform the Auto Set-up.

CAdjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Set-up.

DAdjust the V-Position so that the top and bottom of the picture frame will fit to the display area.

ENGLISH

+

–

NOTE n In case that you have to make adjustments at resolutions of less than 1024 × 768, adjust the vertical position of the screen adjustment pattern to center.

E1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.

+

–

2)Stretch the right side of the picture frame to the right edge of the display area by adjusting the Clock.

+

–

NOTE

n When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).

n Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern.

n The picture may flicker during the Clock, H-Position and V-Position adjustment.

14 OPERATING THE MONITOR