CPress the Auto Button. (Auto Adjust)
DAdjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust.
EAdjust the V.Position so that the top and bottom of the picture frame will fit to the display area.
ENGLISH
F1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
2)Stretch the right side of the picture frame to the right edge of the display area by adjusting the H.Size.
NOTE When the left side of the picture frame moves apart from the left edge of the display area during the H.Size adjustment, adjust steps 1) and 2).
Another way to make the H.Size adjustment is to correct the vertical wavy lines in the zebra pattern.
The picture may flicker during the H.Size, H.Position and V.Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the H.Size adjustment, repeat steps from C.
14 OPERATING THE MONITOR