Iiyama E1902WSV, E1902S, B1902S user manual English

CPress the Auto Button. (Auto Set-up)

DAdjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Set-up.

EAdjust the V-Position so that the top and bottom of the picture frame will fit to the display area.

ENGLISH

+

–

F1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.

+

–

2)Stretch the right side of the picture frame to the right edge of the display area by adjusting the Clock.

+

–

NOTE

When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).

Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern.

The picture may flicker during the Clock, H-Position and V-Position adjustment.

In case the picture frame is bigger or smaller than the data display area after the Clock adjustment, repeat steps from C.

23 OPERATING THE MONITOR