Iiyama E2201W, E2202WS, E2202WSV manual 21

	Menu : 3
								Menu:	3
	(Analog)
					1680 × 1050
					H : 6 5 . 4 K H z V : 6 0 . 1 H z
		Adjustment Item				Problem / Option					Button to Press
		Volume *1		Direct		Too soft
						Too loud
	NOTE	„	is displayed while Mute is active.
		OSD Position				1 2 3 4 5
						You can move the OSD display area
						to any one of the following 5 positions
						within the overall display:
						Press the + Button to move the OSD in numerical order. Press
						the – Button to move the OSD in reverse numerical order.
		OSD Off Timer				Set the OSD Off Timer for 3-60 seconds.
						English	English			Español	Spanish
		Language				Deutsch	German			Italiano	Italian
						Français	French				Japanese
		Signal Select *2		Direct		Auto	Select the signal input automatically.
						Analog	Select the Analog input (D-SUB).
						Digital	Select the Digital input (DVI-D).
		When both Analogue and Digital cables are connected, you can switch between them
	NOTE
		using the direct access facility described earlier. If only one input is present, this will
		automatically be selected. In Power Management Mode input switching is disabled.
		Reset				NO	Return to Menu.
						YES	Factory-preset data is restored.
		Return to Menu				Highlight “Menu : 3” again.
*1	Available for ProLite E2202WS / E2202WSV only.
*2	Available for ProLite E2201W / E2202WS only.

Direct See page 13 for Direct adjustment.

ENGLISH

OPERATING THE MONITOR 17