ENGLISH
ADJUSTMENT MENU CONTENTS
Main Menu |
| Problem / Option | Button to Press | |
| Contrast | Direct | Too dull |
|
| Too intense |
| ||
|
|
|
| |
Color | Brightness | Direct | Too dark |
|
Control | Too bright |
| ||
|
|
|
| |
COLOR | Color Temp. |
| Reddish white |
|
| Bluish white |
| ||
|
|
|
|
NOTE Color temperature is adjustable sRGB and between approximately 10000K and 4500K. The factory preset is 9300K.
Color temperature is fixed to the factory preset 9300K while the OPQ function is active.
sRGB Procedure
To access the sRGB mode, select the Color Temp. function and select 10000K by pushing the + button. Hold down the + button and sRGB function will be activated. When this mode is activated the color temperature is approximately 6500K.
To deactivate the sRGB mode, push the – button while the Color Temp. is selected.
NOTE sRGB is an international standard which defines and unifies the difference of color appearance between equipment.
You can not adjust the Contrast and Brightness during sRGB mode because those settings are locked.
Return to Menu | Return to Main Menu. |
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button operations.
Contrast: | Press the +/– Buttons when the Menu is not displayed. |
Brightness: Press the +/– Buttons and then the Menu Button continuously when the Menu is not displayed.
NOTE | SWITCHING CONTRAST / BRIGHTNESSADJUSTMENT |
| To switch between Contrast and Brightness adjustments, press the Menu Button |
| within 2 seconds after pressing the +/– Buttons during the direct adjustments above. |
The On Screen Display disappears approx. 3 seconds after you stop pressing the buttons while performing the direct adjustment, irrespective of OSD Off Timer setting. (See page 11 for OSD Off Timer.)
9 OPERATING THE MONITOR
