Iiyama PLT1900, PLT1500, PLT1700 user manual Connecting Your Monitor

ENGLISH

CONNECTING YOUR MONITOR

AEnsure that both the computer and the monitor are switched off.

BConnect the computer to the monitor with the Signal Cable.

CConnect the computer to the monitor with the RS-232C Cable or the USB Cable.

DConnect the monitor to the audio equipment with the Audio Cable when using the audio features.

EConnect the Power Cable to the monitor first and then to the power supply.

NOTE „ The signal cables used for connecting the computer and monitor vary by the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.

„For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.

„Make sure you tighten the finger screws at each end of the Signal Cable and the RS- 232C Cable.

„Don't connect the RS-232C cable and the USB cable to the computer at the same time. And cannot use those at the same time.

[Example of Connection]

< Back >

	Power Cable (Accessory)*2
	AC Adapter *1
	(Accessory)
Power Cable (Accessory)*1	RS-232C Cable (Accessory)
	USB Cable (Accessory)
	Audio Cable (Accessory)
	DVI-D Signal Cable (Accessory)
	D-Sub Signal Cable (Accessory)	Computer

*1 Available for ProLite T1530SR only.

*2 Available for ProLite T1730SR and ProLite T1930SR only.

7 BEFORE YOU OPERATE THE MONITOR