IKEA DW60 manual English, Programme selection/cancel button

ENGLISH 8

Programme selection/cancel button

Use the programme selection/cancel button for these operations:

•To set the washing programme. Refer to the chapter 'Setting and starting a washing pro- gramme'.

•To set the water softener. Refer to the chap- ter 'Setting the water softener'.

•To deactivate/activate the audible signals. Refer to the section 'Audible signals'.

•To cancel a washing programme in pro- gress. Refer to the chapter 'Setting and start- ing a washing programme'.

Half-load button

The half-load option is not available for all washing programmes. Refer to the chapter 'Washing programmes'.

•Load dishes in the upper and lower basket.

•Decrease the detergent dosage when you use the half-load option.

•Press the half-load button to set the option.

–The half-load indicator light comes on, when the half-load option is selectable.

With the half-load button pressed the time duration and the consumption of wa-

ter and energy are reduced.

Setting mode

The appliance is in setting mode when all the programme indicator lights are off and the end indicator light flashes.

The appliance must be in setting mode for these operations:

–To set a washing programme.

–To set the water softener level.

–To deactivate/activate the audible signals. If a programme indicator light is on, cancel the programme to go back to the setting mode. Refer to the chapter "Setting and starting a washing programme".

Programme indicator lights A and B

Apart the selection of the corresponding wash- ing programme, these lights have an auxiliary functions:

•The adjustment of the water softener level.

•Deactivation/activation of the audible sig- nals.

Audible signals

You can hear an audible signal:

•At the end of the washing programme.

•When the appliance has a malfunction. The activation of the audible signals is set at the factory.

Do these steps to deactivate the audible sig- nals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold the programme selection/ cancel button until programme indicator light A flashes and programme indicator light B comes on.

4. Press the programme selection/cancel button again.

–Programme indicator light A comes on.

–Programme indicator light B starts to flash.

5.Wait until programme indicator light A goes off.

–Programme indicator light B continues to flash.

–The end indicator light comes on.

The audible signals are activated.

6.Press the programme selection/cancel button again.

– The end indicator light goes off.

The audible signals are deactivated.

7.Switch off the appliance to save the oper- ation.

Do these steps to activate the audible signals:

1.Do the above procedure until the end in- dicator light comes on.