IIKKEELLIITTEE VVIIDDEEOO CCAASSEE
SSUUPPPPLLEEMMEENNTTAALL IINNSSTTRRUUCCTTIIOONNSS FFOORR

##66003388..5500 SSoonnyy HHDDRR SSXX1111,, 1122

This supplemental set of instructions describes additional features specific
to your housing model. Prior to testing the system in the water, please read
this supplement along with the general instruction manual to become familiar
with its features and functions.
Ikelite Video Cases are slightly negative in salt water for stability. This
housing has been water pressure tested at the factory and has a working
depth of 60m 200.
HHOOUUSSIINNGG CCOONNTTRROOLLSS________________________________
• Power On/Off / Mode
• Start/Stop
• Snap Shot / Photo
• Power Zoom
• LCD Screen Control #1
• LCD Screen Control #2
• LCD Reversing Circuit On/Off
• LCD Screen Control #3
• Focus Lock
MMAAIINN OO--RRIINNGG ##00110099__________________________________
O-rings last several year s if proper ly
maintained. Co ntrol seals should not need to
be replaced as long as the control shafts are
kept clean an d lightly l ubricated.
Base
Power Zoom
Port
Power
Touch
Pad
Touch Pad
Touch
Pad
Lid Snap
Focus Lock
Mirror
#6039.94 Sony HDR SR11, 12
Bottom Bar
On/Off
for Reverse
Circuit
Start/
Stop
Snap Shot

PPRREEPPAARRAATTIIOONN

PPAACCKKAAGGEEDD WWIITTHH HHOOUUSSIINNGG____________________________________________________________________________________________
• External UR/Pro Color Filter
• Internal Lens Shade
• Silicone Lubricant
CCOOLLOORR FFIILLTTEERR__________________________________________________________________________
The installati on and usag e of the external UR/P ro
color filter is described in the g eneral instr uction manual .
LLEENNSS SSHHAADDEE______________________________________________________________________________
The internal lens shade helps block light refle ction/
refraction cau sed by the interaction of the ex ternal color
filter and th e port.
Carefully thre ad the lens shade on the front of the
camera lens. The lens th reads are very fine; DDOO NNOOTTcross thread. It should scr ew on
very easily. If it is difficult to turn, you are cross threading.
Completely thr ead the len s shade int o the came ra to avoid any potent ial
clearance or sealing prob lems when t he camera i s installed and the h ousing is s ealed.
LLCCDD MMOONNIITTOORR // EEXXTTEERRNNAALL MMIIRRRROORR____________________________________________________________________________
The cameras LCD monitor can be vi ewed from t he rear of the housing , using th e
external mirro r featured on the side of the h ousing.
Open the LCD monitor on the camera, rotate 180°, and then press it back against
the side of the camera. The external mirror is hinged so that it can be opened to reflect
the image from the cameras LCD monitor for viewing from the rear of the housing.
During transpo rtation, ple ase remember to close the mirror by pressing it against
the side of the housing or lid sn ap.
BBAATTTTEERRYY AANNDD TTAAPPEE____________________________________________________________________________________________________________
Install a ful ly charged Sony battery on the c amera:
Sony NP-FH50, NP-FH60, NP-FH70, NP-FH100
Other brand b atteries may not fit inside the housing.
Make sure you have loade d an appro priate digita l cassette tape in th e camera.
OOPPTTIIOONNAALL WWIIDDEE AANNGGLLEE LLEENNSS________________________________________________________________________________________
The housingMs port accepts optional 67mm threaded waterproof Wide-Angle lenses
such as the Ikelite #6420 W-20, Epoque DCL-20 and Inon UWL-100 Type 2. These
waterproof lenses secure to the outside of the lens port.
Should you elect to use an optional waterproof lens, carefully thread the lens on
the front of the lens port on the housing. The lens threads are very fine; DO NOT cross
thread. It should screw on very easily. If it is difficult to turn, you are cross threading.
IINNTTEERRNNAALL WWIIDDEE--AANNGGLLEE LLEENNSS OOPPTTIIOONN________________________________________________________________________
Special ports are availab le for use with the Raynox HD-50 50 Pro high definition
wide-angle len s. optional ports sold separately as dome por t #9304 or flat lens port
#9304.1. Rayno x HD-5050 P ro lens not included. Lens nnoottavailable for pu rchase
through Ikelit e.
EEXXTTEERRNNAALL WWIIDDEE--AANNGGLLEE PPOORRTT OOPPTTIIOONN________________________________________________________________________
The Ikelite #6480 WP-80 is a complete unit, no additional lens or port is required.
The Wide Angle Port replaces the housings original port and cannot be removed and
replaced underwater. The WP-80 is useable above water for up to 90 degree field of
view, underwater for up to 80 degree field of view exact angle of coverage varies with
camera model.
External
Color Filter
Internal
Lens Shade