Congratulationson your purchase of an Ikelite Digital Camera
Housing.Ikelite has over 45 years of experience in the underwater
photographicand lighting market. Our products are designed and
builtin the USA by Ikelite for both the professional and amateur
photographer.
Theclear housing permits instant visual inspection of the camera
andall sealing surfaces as well as complete monitoring of controls
andcamera LCD screens.
IkeliteDigital Housings are slightly negative in salt water for
stability.This housing has been water pressure tested at the
factory.Housing is pressure tested to 200’ (60m).
Ikelite Digital Housing
instruction manual
#6184.70 for Nikon S700
2
3

FrontView

Shutter
Release
Lid
Snap
Mode
Playback
DeleteMenu
Multi
Selector/OK
Lid
Snap
Lens
Port

BackView

Zoom
Lanyard
Rotary
Multi
Selector
Thumb
Rest
Power
One-TouchPortrait
Anti-Shake

OOppeenniinngg tthhee HHoouussiinngg

1. Lid Snaps have a LLoocckk.
To open, push Lid Snap
Lock forward and lift
as shown. Keep
pressure on the Lid
Snap so it does not fly
open quickly.
Some lid snaps have a lot of spring tension once they go over
center, have a firm grip on the lid snap. Lid Snaps may be
opened one at a time.

IInnssttaalllliinngg tthhee

CCaammeerraa

1. Remove the back
from the housing.
The mounting tray
for the camera is
secured to the
housing back.
Position the camera
on the tray and
secure it with the
mounting bolt which
threads into the
camera’s tripod socket.
CCAAUUTTIIOONN::
Some camera tripod socket threads are plastic. The mounting
tray bolt is metal. Do not cross thread or over tighten as you
may damage the camera tripod socket threads.
2. Pull out on each housing control until it stops. This will get the
controls out of the way for installing the camera.
CAMERA / MOUNT
Lid
Hook
O' Ring
Mounting Bolt
Mounting
Tray
Nikon
COOLPIX
Lift
Push Forward
Lid Snap Lock
4

PPlleeaassee RReeaadd

We suggest that you read this instruction booklet thoroughly
before use. If you are new to underwater photography be sure
to read the General and Photo Tips.
We also suggest that you read the camera manual thoroughly
to have a full understanding of where each camera control is
located and what function each control provides.

PPlleeaassee RReeaadd IIff UUssiinngg aann EEVV--CCoonnttrroolllleerr

The EV-Controller used with Ikelite DS Substrobes have two
user settings. One setting is for strobe selection, the other is for
pre-flash or non pre-flash. TThhiiss ccaammeerraa uusseess pprree--ffllaasshh, thus the
EV-Controller should be set to the pre-flash position when used
with this camera.