Ikelite Digital Housing

inst

ructi

on

ma nual

for ULTRACompact Digital DC-100 Housing

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 45 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory to 200' (60m).

Opening the Housing

1. Depress opposing latch buttons simultaneously to open the housing. Once the latch is unlocked, rotate the latch handle away from the housing until it stops. This motion will also break the housing o-ring seal and open the housing back slightly. NOTE: Latch must be rotated to the fully open position to assure easy opening of the back. Rotate the hinged back to

it’s open position.Latch in open position

Latch Button

Latch Button

Installing the Camera

1. Place the camera face down into the front housing ribs as shown.

Please Read

We suggest that you read this instruction booklet thoroughly before use. If you are new to underwater photography be sure to read the General and Photo Tips.

We also suggest that you read the camera manual thoroughly to have a full understanding of where each camera control is located and what function each control provides.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite DS Substrobes has two user settings. One setting is for strobe selection, the other is for pre- flash or non pre-flash. If your camera model uses pre-flash, the EV-Controller should be set to the pre-flash position.

Camera Setup (for most point and shoot digitals)

1. Set ISO to lowest setting available.

2. Set camera to least automated mode.

3. Enable macro setting if pictures are over-exposed. Also, zoom in and back away from the subject.

4. Set aperture to smallest available setting (highest numerical setting).

5. Make sure flash is forced “on”.

6. See “supplemental instructions” for any additional camera settings specific to your camera.

2

Closing the Housing

1. Place housing face down in your lap or on a flat surface.

2. Check to see that there is an o-ring on the housing back and that it is clean, lightly lubed, and in its proper location.

Housing Back - Top View

O-ring

3.Rotate the hinged back onto the housing front. Close the latch and make sure it locks. Latch will “click” into it’s locked position. Latch buttons will NOT be depressed when latch is properly locked.

Latch in “locked” position

Latch Button

Latch Button

IKELITE

ULTRAcompact

Made in USA

3

4

Camera in Housing Front

 

Page 1 Page 2
Page 1
Image 1
Ikelite ALL instruction manual Opening the Housing, Installing the Camera, Please Read, Closing the Housing
Page 1 Page 2

ALL specifications

Ikelite is a renowned name in the world of underwater photography and videography. With decades of experience, the brand specializes in designing camera housings, lighting systems, and accessories that cater to the needs of both amateur and professional divers. The Ikelite ALL series exemplifies the brand's commitment to quality, innovation, and functionality.

One of the standout features of the Ikelite ALL series is its exceptional build quality. Constructed from durable materials such as ABS PC and featuring a clear polycarbonate back, these housings are designed to withstand the rigors of underwater environments. This robustness ensures that photographers can dive with confidence, knowing that their gear is protected from water pressure and potential impacts.

The Ikelite ALL housings are also known for their user-friendly design. Easy access to all camera controls allows photographers to operate their cameras without having to surface. This is particularly crucial for capturing those fleeting underwater moments, where time is of the essence. The large, ergonomic handles provide a comfortable grip and stability, making it easier to frame shots while maneuvering in the water.

Technologically, the Ikelite ALL series offers innovative solutions for underwater lighting. The system is designed to work seamlessly with Ikelite's range of underwater strobes and LED lights. This compatibility enhances the overall shooting experience, enabling divers to capture vibrant images with accurate colors, even in deep water. The incorporation of TTL (Through-The-Lens) metering for automatic flash exposure further simplifies the process, allowing photographers to focus on composition rather than technical settings.

A unique aspect of the Ikelite ALL series is its modular design. This allows users to adapt their setups easily by adding accessories like lens ports and arms. This versatility is highly valued among photographers who wish to experiment with different styles and techniques, from wide-angle shots to macro photography.

In conclusion, the Ikelite ALL series embodies the essence of reliability, ease of use, and technological innovation. Its robust construction, intuitive design, and compatibility with a range of lighting solutions make it an ideal choice for any underwater enthusiast looking to enhance their photography or videography experience. Whether you're a hobbyist or a seasoned pro, the Ikelite ALL series has the features and characteristics to help you capture the beauty of the underwater world with precision and style.
Top Page Image Contents