Lens Port

Treat the glass in the lens port as a camera lens. After use, rinse and gently dry the lens port to avoid water spotting. To clean use a mild soap solution or lens cleaner.

Do not use alcohol or window cleaner on the Lens Port.

The Lens Port will accept (2) Wide-Angle Adapters. The Wide-

Angle Adapter #9306.80 which is required to mount the Inon

UWL-150AD Bayonet style wide-angle lens. The Wide-Angle

Adapter 9306.81 is required to mount the following Wide-Angle

Lenses, Inon UWL-100, Sea&Sea #58070 and Ep0que DCL-20

screw thread (67mm) style wide-angle lenses.

These lenses can be secured onto the Wide-Angle Adapter

above or below water as they are designed to have water

between the front of the port and the accessory lens. Make sure

no air bubbles are trapped between the port and the accessory

lens. Any vignetting that occurs can be eliminated by zooming

the camera lens slightly. The camera’s built-in flash cannot be

used with wide angle

 

lenses. The front of the

Wide-Angle Adapter

lenses are so large they

 

block the camera’s flash.

wide-angle lens

To properly light subjects

 

when using a wide angle lens an external strobe should be used. Due to the wide-angle of coverage of these lenses, the DS125 Substrobe is recommended or two DS51 Substrobes.

10

Optional Accessories

Back O’ring #0109

O’rings last for several years if properly maintained. (See maintenance) Always carry a spare.

Wide-Angle Adapter #9306.80

Required to mount Inon UWL-150AD Bayonet style wide-angle lens.

Wide-Angle Adapter #9306.81

Required to mount Inon UWL-100 Screw Thread (67mm) style wide-angle lens.

UR/Pro Filter #6441.32

The UR/Pro underwater color correcting filter is designed to restore some of the warm colors filtered out by the water. For available light use only, not recommended for use with flash.

Tray with Release Handle #9523.31

Tray and Release Handle is required to mount external Substrobes.

11

Optional Accessories Substrobe DS51 Package #3944.54

The Substrobe DS51 package includes the Substrobe DS51, the EV Controller and ball socket arms. The EV Controller provides 10 manual power settings in 1/2 stop increments. An external strobe offers several advantages over using the camera’s built-in flash. External strobes move the flash away from the camera lens which helps reduce backscatter. They also expand lighting options to achieve the best lighting for different subjects. A second external digital strobe package can be added to fill the shadows and produce more realistic photographs.

The Substrobe DS51 covers the equivalent of a 28mm lens. It is the ideal choice when using only the camera lens or the camera lens with a macro accessory lens.

If an accessory wide angle lens wider than 28mm is used, the ideal lighting choice is the Substrobe DS125, which covers 100 degrees, or two Substrobe DS51’s can be used.

Substrobe

DS51

Ball Socket

Arm

EV Controller

NOTE:

Optional Tray and Release Handle required to mount Substrobes.

Optional Accessories

Substrobe DS125 Package #3944.77 The Substrobe DS125 package includes the Substrobe DS125, the EV Controller, ball socket arm and charger. The EV Controller provides 10 manual power settings in 1/2 stop increments. An external strobe offers several advantages over using the camera’s built-in flash. External strobes move the flash away from the camera lens which helps reduce backscatter. They also expand lighting options to achieve the best lighting for different subjects. A second external digital strobe package can be added to fill the shadows and produce more realistic photographs.

The Substrobe DS125 covers the equivalent of a 18mm lens, 100 degrees. It is the ideal choice when using accessory wide angle lenses greater than 28mm.

Substrobe

DS125

Ball Socket

Arm

EV Controller

NOTE:

Optional Tray and Release Handle required to mount Substrobes.

12

13

Page 4
Image 4
Ikelite C-60 Lens Port, Optional Accessories Back O’ring #0109, Wide-Angle Adapter #9306.80, Wide-Angle Adapter #9306.81