Ikelite Digital Housing

i n s t r u c t i o n m a n u a l

#6182.21 for Nikon CoolPix L1

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 40 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200’ (60m).

Power

Shutter

Release

Lid

 

 

 

 

 

 

 

 

 

 

Lid

 

 

 

 

 

 

 

 

 

 

Snap

 

 

 

 

Lens

 

 

 

 

 

Snap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port

 

 

 

 

 

Front View

Mode

Thumb

 

Rest

 

Zoom

Please Read

We suggest that you read this instruction booklet thoroughly before use. If you are new to underwater photography be sure to read the General and Photo Tips.

We also suggest that you read the camera manual thoroughly to have a full understanding of where each camera control is located and what function each control provides.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite DS Substrobes have two user settings. One setting is for strobe selection, the other is for pre-flash or non pre-flash. This camera uses pre-flash, thus the EV-Controller should be set to the pre-flash position when used with this camera.

2

Menu

Play

Delete

Back View

Lanyard

Multi Selector/OK

3

Page 2
Image 2
Ikelite Coolpix L1 instruction manual Please Read If Using an EV-Controller