Ikelite DCR-DVD-91 instruction manual E P a R a T IO N, Main O-RING #0109, Packaged with Housing

IKELITE VIDEO CASE

SUPPLEMENTAL INSTRUCTIONS FOR

#6038.32 Sony DCR-DVD-91, DVD-101, DVD-201, DVD-301

This supplemental set of instructions describes additional features specific to your housing model. Prior to testing the system in the water, please read this supplement along with the general instruction manual to become familiar with its features and functions.

Ikelite Video Cases are slightly negative in salt water for stability. This housing has been water pressure tested at the factory and has a working depth of 60m (200').

HOUSING CONTROLS________________________________________________________

• Power On/Off / Mode

• Start/Stop

• Power Zoom

• Photo

Port

		Bottom Bar
	Base
		Power Zoom
Eyeport	Start/	Photo
Power/	Stop
Mode

MAIN O-RING #0109___________________________________________________

O-rings last several years if properly maintained. Control seals should not need to be replaced as long as the control shafts are kept clean and lightly lubricated.

P R E P A R A T IO N

PACKAGED WITH HOUSING_____________________________________________

• External UR/Pro Color Filter

• Silicone Lubricant

• Lens Shade

COLOR FILTER	Internal	External
	Lens Shade	Color Filter

The installation and usage of the external UR/Pro color filter is described in the general instruction manual.

LENS SHADE___________________________________________________________

The internal lens shade, provided with the housing, helps block light reflection/ refraction caused by the interaction of the external color filter and the lens port.

Carefully thread the lens shade on the front of the camera lens. The lens threads are very fine; DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading.

Completely thread the lens shade into the camera to avoid any potential clearance or sealing problems when the camera is installed and the housing is sealed.

OPTIONAL WIDE ANGLE LENS___________________________________________

The lens port on the front of the housing accepts the optional wide-angle lenses offered by Epoque (DCL-20), Inon (UWL-100) and Sea&Sea (58070). These waterproof lenses secure to the outside of the lens port, and are not marketed by Ikelite.

Should you elect to use the optional Epoque, Inon or Sea&Sea lens, carefully thread the waterproof lens on the front of the lens port. The lens threads are very fine;

DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading.

There is another optional wide-angle lens available, which secures directly to the front of the camera lens, inside the housing. Sony offers the optional X0.6 conversion wide-angle lens VCL-0625S, available from Sony, which is compatible with this camera system.