![INTERCHANGEABLE HANDLES](/images/new-backgrounds/39480/394807x1.webp)
INTERCHANGEABLE HANDLES
Removethescrewandwasherandthenslidethehandleoutofthebody.Slidetheotherhandle intothegrooveandsecurewiththescrewandwasher.
NOTE: Ikelite's black vinyl lanyard is NOT recommended for use with RCD
REPLACEMENT PARTS
9012.2 | Head assembly complete with bulb: H | |
9012.18 | Head assembly complete with bulb: HR | |
9012.88 | Head assembly complete with bulb: | |
9012.96 | Head assembly complete with bulb: | |
A | 0501 | Rubber shroud: all models |
B | 9012 | Head with hydrogen absorber: H |
B | 9012.17 | Head with hydrogen absorber: HR |
B | 9012.80 | Head with hydrogen absorber: |
B | 9012.95 | Head with hydrogen absorber: |
C | 0042.55 | H BULB, IKE4 5.0V halogen, standard higher intensity |
C | 0040.18 | HR BULB, 4.7V halogen |
C | 0042.58 | |
C | 0042.20 | |
D | 9012.3 | Bulb holder/contact bar: H and |
D | 9012.38 | Bulb holder/contact bar: HR and |
E | 0123 | |
F | 9013 | |
F | 9013.8 | |
| 0083.9 | Charger, USA 110/220V |
G | 0083.91 | Charger, Euro 220V |
9012.5x | Body assembly with toggle: note color H and HR | |
G | 9012.8x | Body assembly with toggle: note color |
| 0910 | Hydrogen absorber |
7
INTERCHANGING MODELS
RCD H and HR
The HR front head assembly is modified for the rechargeable light which means it is NOT interchangeable with the
The
MAINTENANCE_________________________________________________________________
1. We suggest storage of your lite with the locking lever OPEN to allow any potential hydrogen/air mixture to escape.
2. The inner ledges of the lite body and front assembly are the sealing surfaces. DO NOT allow these surfaces to become damaged.
3. Keep the
4. Occasionally clean the metal contacts for a better connection.
5. The front head assembly has been factory sealed; DO NOT disassemble.
CAUTION______________________________________________________________________
DO NOT use batteries that have been wet; batteries from a flooded lite should be discarded. Water could create an internal short circuit at some later date causing a potential explosion. The normal evolution of all batteries is emitting hydrogen gas. This gas must be absorbed or allowed to escape to prevent ignition of the entrapped hydrogen/air mixture. We suggest storage of your lite open to allow any hydrogen/air mixture to escape. A hydrogen absorber has been concealed inside this lite and should NOT be removed. In case the lite floods, install a new hydrogen absorber in the spare bulb holder and replace the batteries.
IKELITE LIMITED WARRANTY____________________________________________________
All Ikelite products are warranted against any manufacturing defects for a period of one year from the date of purchase. Defective products should be returned prepaid to Ikelite. Ikelite will, at its discretion, repair or replace such products, and will return to customer prepaid. All other claims, of any nature, including but not limited to bulb failure are not covered. Except as men - tioned above, no other warranty expressed or implied, applies to this Ikelite product.
IKELITE UNDERWATER SYSTEMS
50 West 33rd Street
PO Box 88100
Indianapolis, IN 46208 USA
Email ikelite@ikelite.com